RGT-MT18 - Reactive power controller 18 levels +TCR with RS485 ModBus

18 steps + TCR Power factor controller for symmetrical/asymmetrical networks with 5-inch touchscreen and RS-485 (TENSE)

Reactive power control relays are designed to reduce reactive power (inductive and capacitive) that is not used by the load and is drawn from the network. When inductive power is drawn from the network, the relay acts by removing a capacitor with an appropriate value. If capacitive power is drawn from the network, it acts by removing a shunt inductor with the appropriate value. In this way, it tries to reduce the inductive/active and capacitive/active speeds of the system. It was designed to provide more reasonable compensation in unbalanced inductive and capacitive systems with the RGT-MT18 TCR step

• Generator input and generator compensation

• Alarm output for voltage, current/harmonic voltage, inductive and capacitive

• Adjustable strike, discharge, and stabilization times

• Remote communication with RS485 (RS485 ModBus RTU)

• Single-phase, two-phase, and three-phase capacitors and bypass reactors can be connected

• Harmonic voltage and current can be observed up to the 61st harmonic

• Total energy (import/export) can be monitored

• THD-V and THD-I values of each phase can be observed

• Created power analysis (20 samples 9999 min.) - for capacitor selection

• Temperature alarm output

• Demand recording (active, reactive, and apparent power and current demand)

• Minimum, maximum, and average values of current and voltage of each phase can be monitored

• Current date and time