DTA-96 Digital temperature level control relay

Temperature controller (two-channel thermostat) with timer and heating profile - automatic adjustment PID controller, panel or device mounting. Step temperature controller. Dimensions 96x96x90 mm.

Unlike cheap analogs, the TENSE thermostat allows setting temperature limits and the time for the temperature to reach the set values. This greatly simplifies the programming process. Additionally, the PID mode keeps the system temperature as close as possible to the set values.

Another important difference compared to competitors is the simultaneous display of current temperature, reference temperature, control step, and time. The presence of START/STOP/PAUSE/SET control buttons on the front panel is very convenient - allowing quick and efficient control of your technological processes.

Main features:

• You can choose one of the operating modes: P, PI, PD, PID or simply ON-OFF.

• Two relay control outputs OUT and ALARM, with optional configuration of the OUT output for solid-state relays

• Programming of up to 20 temperature levels / heating stages

• Each level is programmable for up to 18 hours of operation

• Automatic selection of PID control parameters

• Wide selection of temperature sensors for thermostat connection - T/C (J, K, T, S, R) or Pt100

• Automatic reduction of "overshoot" in PID mode

• Built-in anti-windup function - compensation for integration saturation effect

• Choice of absolute, relative, or band value for the ALARM contact

• Possibility to set upper and lower levels for SET and ALARM

• The controller display shows two temperature values - 4 characters and 7 segments for the set temperature value and 4 characters and 7 segments for the actual temperature value the controller is measuring, as well as time interval values and step numbers

• Built-in cold junction temperature compensation for T/C sensors (cold junction compensation) 0...50°C

• Linear compensation for Pt100 type temperature sensors connected to the thermostat up to 10 Ohms

• Possibility to set the measurement temperature compensation value for the thermostat from -100...+100°C

• Password protection for temperature controller parameters

• The temperature controller has very high accuracy in setting and time intervals

• Non-volatile memory (EEPROM) to save settings

• Easy connection to the controlled device - all connections are made with quick-release connectors

• Optional power supply 24 V DC or AC available

• Installation height - up to 2000 m above sea level

• Temperature sensor not included

• Don’t forget to order a circuit breaker to protect the power supply circuits and the control/signal contact.

Measurement scales (intervals):

Sensor type - range:

• -100 ... 600 °C, type J T/C, (InPt = J)

• -100 ... 1300 °C, type K T/C, (InPt = k)

• -100 ... 400 °C, type T T/C, (InPt = t)

• 0 ... 1750 °C, type S T/C, (InPt = S)

• 0 ... 1750 °C, type R T/C, (InPt = r)

• -100 ... 600 °C, Pt100 (InPt = Pt)

• -99.9 ... 600.0 °C, Pt100 (InPt = Pt.0)